Current leadtimes are
- 3 weeks for the testings if you supplied us with a lacquer from the moment it arrives and we have all the required information.
- 4 to 5 weeks for the testings if we do the cutting in-house from the moment we have all the required files and information.
Followed by
- 10 to 12 weeks for the finished order after we've received your approval on the testings and workable artwork.
Are you supplying digital audio files?
Please select Cutting by Record Industry / Artone Studio + Digital Master in the next box.
The mastering component on the quote/invoice represents the cutting including the production of the metal stampers used to press your records.
Does your audio need pre-mastering?
Supplied audio needs to be mastered for vinyl. If necessary, we offer a pre-mastering service to optimalize your audio for vinyl.
The costs of pre-mastering are €25,- setup plus €5,- per minute audio.
Please give us an estimate of the total amount of minutes to be pre-mastered.
You can create a custom combination of letters (A-Z), numbers (0-9), up to 15 characters, which will be inscribed next to the run-out groove. Please be aware that the chosen catalog number will be shown in the mirror of each record. Example: MYRELEASE021
For our Dutch customers only: Make sure you apply under the same catalog number when requesting your Stemra license. Applying for a license is mandatory before we can start any production. You can apply for a Stemra license at bumastemra.nl
We will require a catalog number when starting any order.
To ensure you're fully satisfied with the audio quality of the cut, we press test pressings for every new production for you to approve.
You'll receive 3 to 10 records, each with plain white labels and white polylined inner sleeves. These are strictly intended for evaluating audio quality and inscription of the information in the mirror of your record(s).
For new customers, we require full prepayment for the order. We include an additional 20 units above your requested quantity in the quote/invoice to account for potential under- or overproduction during manufacturing.
If fewer units are delivered than invoiced, you'll receive a credit for the difference.
We advise a polybag to avoid scuffs/marks on the record. The polybag is an unprinted paper sleeve with a thin plastic layer on the inside. This layer also helps to reduce static electricity, which minimizes dust attraction and prevents crackling sounds during playback.
Please note labels are heated during drying and pressing, metallic pantone colours or colours with a high percentage of white can shift in color during this process.
If you are in doubt of what the specifications of your supplied artwork are, please select CMYK (Cyan, Magenta, Yellow and Black). Do not supply your artwork in RGB colours.
The weight of the paper influences the thickness of the sleeve. Depending on personal preference, a heavier paper might be experienced as more luxurious.
In addition, the Kraft option is a brown cardboard, whereas the Hansaboard is white on the coated side and grey on the reverse side.
This choice is about the surface you want us to print your artwork on. The paper has two sides: the coated side and the uncoated side.
The coated side gives a glossy finish. This allows for sharper details, richer colors, and better ink adhesion.
The uncoated side provides a more natural, textured feel, sometimes preferred for a vintage or eco-friendly look. It also absorbs more ink, which may result in less sharper images.
When in doubt about what you want, please let us know in the remark box at the end. We'll be happy to advise you.
Sleeves printed on the coated side of the board, are finished with an aqueous varnish on top of the ink to protect the artwork, resulting in a slightly glossy appearance. When printed on the uncoated side of the board, we finished with an aqueous matt varnish.
With a dinked 7” record, we punch out a large centre hole. Please be aware of the fact that this requires a special adapter/spider to be placed onto the turntable.
For customers outside the EU without a valid EU VAT number, VAT will be charged if goods remain within the EU.
For EU customers with a valid EU VAT number, VAT will be charged if goods remain within the Netherlands.
EORI number is required when shipping to the UK.
Prices shown are excluding cost of freight. We will include them according to your delivery preferences when sending you the final quote for approval and pre-payment invoice.
The weight of the paper influences the thickness of the sleeve. Depending on personal preference, a heavier paper might be experienced as more luxurious.
We work with two catalogue numbers; one which we will assign to your release and is used in communication (a Record Industry number) and one you will provide us with which will also be engraved in the dead wax/lead out of each side. How your catalogue number is built up is completely up to you, you can use numbers as well as letters or a combination. An example is BA0001.
If your company is registered in the EU but outside of the Netherlands and you have a VAT number, we can invoice without VAT, on condition that all the records leave the Netherlands. For Non-EU countries we don't need a VAT number. We can invoice without VAT but all records will have to be shipped outside of the EU. For shipping within the EU for a non-EU registered company, we charge VAT.
Yes, our service includes shipping up to three different delivery addresses. It is possible to ship to more delivery addresses with a maximum of five, however we do charge € 5 per extra delivery address.
We work on the basis of 100% advance payment for all new customers. You can pay via international bank transfer or via Paypal. Instructions and information will be sent along with your advance payment invoice.
Keep it! As it's one of a kind, there is probably only one record with this mistake, which makes it highly collectible! Please allow for a small percentage of rejects (2%), in a production process like manufacturing records, sometimes technical errors occur. If there are a few more records with the same mistake, in the most unfortunate case, please contact us and send a mail to orders@recordindustry.com and describe what is wrong with it. We might request a sample if our archive copy is 'clean', so our QC can investigate what went wrong.
No we can't. We do not have capacity to store boxes or pallet shipments. So once packed, the records need to be shipped right away. This is why it is important to give us the right details about quantities and shipping addresses at the moment the finished product order is started. Once everything is packed and ready to ship, it is not possible to make any amendments to quantities to be shipped to a certain address, unless we charge administration costs.
Yes and no. It's not possible to supply your own labels. After consulting us, and if there is a really good reason for it, you can supply other printed parts (inner sleeves, outer sleeves, inserts and posters) but we charge administration costs plus an extra charge per supplied sleeve for not ordering printed sleeves at Record Industry. Next to that, manual sleeving costs will apply. Supplied stickers are not accepted, unless they are on a sheet as an insert and not to be applied on the sleeve by us.
Templates for labels, sleeves and other paper parts can be found here. As well as an artwork manual about how to supply your artwork.
We store sleeves, posters, inserts and boxes for at least one year. After that we might destroy them or offer to store them for you for a longer period, against an extra charge per six months. Please note; sleeve stock of 100 or less will be destroyed right away, unless you request us to send them along with your order.
The current board we use for sleeves is made of about 80% recycled material. Only the outside layers are made from “new” fibres, just to control the looks, quality and process ability. We can use FCS-certified board, which will be the same board, but with the guarantee that the trees used will be re-planted. More alternatives are available (such as Eliphant grass) but as it is all very expensive, in our experience customers are happy to accept our current 80 % recycled board
You have to consider a certain tolerance regarding the position of the spine text, about 1 millimeter to the left or right. The reason for this is mainly the size of the board, as this sometimes differs per batch, the lay edge may be divergent which cannot be corrected by the folding machine.
The current profile our printer works with is PSOcoated_v3.icc (for coated paper).and
PSOuncoated_v3_FOGRA52.icc for uncoated paper). Detailed information about profiles can be found in our artwork manual.
Yes, we can do both. In general, we apply a corrective mastering, small corrections to fine tune the audio for the cut. This is NOT a creative mastering. We offer this as well, but it is then referred to as pre-mastering. This includes compression, limiting, EQing and/or levelling of each track to optimise your audio prior to cutting (you will receive all files for approval prior to cutting). We offer pre-mastering at a competitive price, please contact info@recordindustry.com for more information.
If you don't want us to 'touch' your audio, please specify this clearly on your label copy. Also extra remarks such as a loud cut or other relevant info, have to be mentioned on your label copy.
Once the cut is made, it is not possible anymore to make any changes to the audio or track order. We can make a new cut, but extra costs will have to be charged.
We store your metal parts for at least 5 year after your last order. We do not consult customers if they want to keep their parts prior to destroying them, as that's simply too much work. You can request your metal parts to be sent to you for €35 ex VAT and shipping costs. Please note: when you re-supply them (or supply any metal part for that matter) we strongly advise to order a new testing to make sure they are still in good condition.
An endless loop is free of charge. Please mention your request for an endless loop clearly on your label copy. The length of an endless loop is exactly one cycle. The cycle length for a 33 RPM cut is 1.8 seconds. For a 45 RPM cut it is 1.33 seconds. The last track on the A or B side which you would like to end in an endless loop, needs to have at least one fragment of the desired length at the end of the track (1.8 or 1.33 seconds).
There is no standard production time. The production time is based on the actual demand and available capacity. This applies to both test pressings and the final product. It is advisable to check our lead time prior to placing an order. If you need your order on a specific date, it's helpful to communicate this at the time you place your testing order, so our colleagues can do their utmost to meet your requested delivery date and keep an extra eye on your order.
We don't offer a fast-lane service. All of our customers get the same service, but one or our slogans is 'The Impossible We Do Immediately, Miracles Take A Little Longer' so please do contact us if you have a rush job, as we can always try to work that miracle for you.
200 units for an initial release, 200 for a re-order (this applies for both black and coloured vinyl). For most print (sleeves, inserts) orders, the minimum is 250, but for labels and stickers and special print the minimum is 500. For pantone labels, the minimum is 1100.
Over and under deliveries related to the agreed number of final product are allowed if they do not amount to more than 10%, with a maximum of 50 pieces if the order amount is up tio 5,000 pieces, and with a maximum of 100 pieces if the order amount is more than 5,000 pieces. In connection to possible waste during the production process, we need to order more paper parts than the actual ordered amount of records. This will be ordered and charged as follows:
- Labels +10% (for coloured vinyl +20%)
- Jackets/ inner sleeves/ inserts order amount:
~ up to 5,000 pieces 50 pcs.
~ from 5,000 up to 10,000 pieces +100 pcs.
~ from 10,000 pieces per 10k +200 pcs .
- Stickers +10%
Yes, there are two possible options:
- Engraving something into the inner groove of the record (the lead out or dead wax) with a maximum of 30 characters. This is a service at no extra charge, but I'm afraid we cannot amend spelling errors once engraved.
- Laser-etching the entire side of the record (there will be no audio on that side). For this you need to supply a design in a PDF, and extra charges apply. For more information and samples, click here.
Test pressings are pressed on black vinyl with an average weight of 160 grams. We press all test pressings for both 140 and 180 grams at the same weight, your final order will be pressed at the requested weight. The test pressing for a 10” record is also pressed on 12” size.
The PVC used is of the same quality, however some of the colour pigments are more susceptible to higher noise levels and/or clicks in the lead-in and lead-out grooves, or on quiet parts of the recording. Did you know the original colour of PVC is crystal clear? They coloured it black as quality checks on black vinyl are easier as you can see almost everything, which is not the case with coloured vinyl.
For a mixed colour, we mix the vinyl pellets per weight, together in a bucket where the pellets are sucked into an extruder (a long screw) to heat them up and create the puck. We cannot influence the number or percentage of pellets per colour per puck, so the outcome can actually differ per record.